If you’re seeking a DOT vehicle inspection in Kelmscott, being prepared can save you time, stress, and repeat visits. At Kelmscott Service Centre we’re committed to making the inspection process straightforward, compliant, and hassle-free. 

Before attending your inspection, here are a few important things to know—especially if your vehicle is unlicensed or modified.

If your vehicle is currently unlicensed in Western Australia, you must obtain a 'moving permit' before driving it to an inspection. 

A 'moving permit' allows you to legally drive your unlicensed vehicle to and from an inspection station or repairer. 

You can apply online through the WA Department of Transport before your booking. Make sure the permit covers the date and time of your inspection. 

Why this matters: 

Driving an unlicensed vehicle without a valid 'moving permit' can result in fines and penalties. It’s your responsibility as the vehicle owner to ensure the correct permit is in place. 

If Your Vehicle Is Unlicensed, You’ll Need a Moving Permit 

Vehicle modifications in WA are categorised as either simple or complex. It’s essential to understand which category your vehicle falls into before attending your AIS inspection. Kelmscott Service Centre only processes simple modification permits as part of our inspection service. 

2. If Your Vehicle Is Modified, Identify the Type of Modification 

Simple modifications are typically minor changes that still require approval but do not significantly alter the vehicle’s structural integrity or safety systems. 

Examples may include: 

Important: Kelmscott Service Centre only processes simple modification permits as part of our inspection service. 

If your vehicle requires a simple modification permit, you must: 

Purchase the permit before your inspection, and 

Provide the receipt number at the time of inspection. 

Without the correct permit documentation, your inspection cannot proceed. 

Complex modifications involve significant structural or engineering changes, such as: 

These modifications require additional engineering certification and approval processes through the WA Department of Transport. 

If your vehicle falls into this category, you will need to complete the appropriate approval steps before booking your AIS inspection. 

If your vehicle requires a simple modification permit: 

3. Purchase Any Required Simple Modification Permit Before Your Inspection 

It must be purchased online prior to your appointment 

You must provide your receipt number at the time of inspection 

Arriving without the permit or receipt number may delay the process and require a rebooking. 

Tip: Organise your documentation the day before your appointment to avoid unnecessary delays. 

To maximise your chances of passing your inspection the first time: 

4. General Tips to Help Your Inspection Go Smoothly 

Ensure all lights, indicators, and brake lights are working 

Check tyres for legal tread depth and correct sizing 

Confirm there are no visible fluid leaks 

Address any obvious warning lights on the dashboard 

Need clarification? Contact Kelmscott Service Centre today.

Book your Authorised Inspection Station (AIS) appointment now and drive away with confidence.

Preparing for a DOT vehicle inspection in Kelmscott? Learn about moving permits, simple vs complex modifications, and tips to pass first time at Kelmscott Service Centre.

DOT Vehicle Inspection Kelmscott| What to Know Before Your AIS Inspection

What to Know Before Your Vehicle Inspection 

Car been yellow stickered/ received a defect notice? Rego has lapsed? Need an annual inspection for ride share? Kelmscott Service Centre is an Authorised Inspection Station (AIS) for the Department of Transport. 

We can inspect your car and provide you with the paperwork to enable you to get back on the road quickly.

You need to license your vehicle in Western Australia for the first time.

You received a compliance notice (commonly called a yellow sticker, work order or defect notice).

Your vehicle has been modified (GVM upgrade, long range fuel tank etc.), Note, we only do simple modifications (complex modifications requires engineering).

Your vehicle requires annual examinations (taxis, ride share, and driving instructor vehicles).

Licensing a written-off vehicle( WOVR must be provided at inspection).

Identify whether your vehicle has any simple or complex modifications

Purchase any required simple modification permit.

Need clarification? Read our What to Know Before Your Vehicle Inspection page.

**PLEASE NOTE: We only inspect light vehicles and motorcyles.

Kelmscott Service Centre can inspect your car if it has been defected and provide you with the paperwork to enable you to get back on the road quickly.

Kelmscott Service Centre - Authorised Inspection Station (AIS) for the Department of Transport. 

MTA-WA

AAAA

IAME

Kelmscott Service Centre (MRB11777) take great pride in offering their clients personalised, and friendly service at all times. 
Conveniently located in Kelmscott, WA, the business is a member of the Repco Auto Tech training program, ensuring their technicians are kept fully up to date with modern vehicle repair methods. Kelmscott Service Centre have a wealth of experience in servicing all makes and models, including commercial fleet vehicles. As a Repco Authorised Service centre, they have a commitment to high quality workmanship, ensuring the very best in automotive care.

Kelmscott Service Centre

DOT Authorised Inspection Station

Let's get started with your booking.

Related articles

What to Know Before Your Vehicle Inspection